Several matters needing attention in the maintenance of new motorcycles- Lextra Moto

In order to make sure everyone to maintain their motorcycles well, here are some advice to share with you.

1. Run-in period oil

You know that the running-in period of a motorcycle is 1500 kilometers to 2000 kilometers, and the oil will be changed according to the method of 200 kilometers, 500 kilometers, 800 kilometers, 1500 kilometers, and 2000 kilometers. Engine internal gear occlusion, ejector rod or chain work of new motorcycle will produce scrap iron chips, so you should replace them frequently. Go to a special after-sales store to change the special engine oil, please don't covet cheap engine oil.

2. How to drive a motorcycle during the run-in period?

The run-in period is actually the most troublesome thing. The speed of the first gear should not exceed the limit speed of this gear. No people in the back seat and don’t climb too steep slopes within 800 kilometers of motorcycles, and don't let the car take a lot of effort. This will work best.

3. Run-in end

After 2,000 kilometers, it is not completely run-in. Try to increase the speed of all gears slowly and evenly during the cycling process to stimulate the potential to achieve the best results. After 2500 kilometers, clean the air filter (replace it if it is a paper air filter) and the oil filter element, drain the oil and replace it with new oil.

4. Motorcycle post-maintenance

Post-maintenance generally replaces engine oil and air filter on the basis of 1500 kilometers. Check the battery every month for leakage.