LXT250R Motocross
- L x W x H: 2160X810X1260mm
- Wheel Base: 1455mm
- Vehicle Weight: 114kg
- Seat Hight: 940mm
- Minimum Ground Clearance: 320mm
- Fuel Tank Volume: 6.5L
- Handle Bar: 7075 Al-alloy Reducer Handle Bar
- Battery Model: 12V/6A Nanometer Colloid Battery
| LXT250R Motocross version Specification | |
| Engine | |
| Engine Model | Zongshen NC250 |
| Engine Type | Single Cylinder, 4 Stroke, 4 Value, Water Cooling, with Balance Shaft |
| Displacement | 249.6cm³ |
| Bore and Stroke | 77 x 53.6mm |
| Compression Ratio | 11.6:1 |
| Fuel Delivery | PWK34 Carburetor |
| Maximum Power | 21.5KW/12500rpm |
| Maximum Torque | 24.5NM/9000rpm |
| Gearshift Method | Internatioal 6-speed Gearshift. Forging CNC Gearshift Pedal |
| Starting Method | Electric/Kick Start |
| Iginition Method | CDI |
| Frame | |
| L x W x H | 2160X810X1260mm |
| Wheel Base | 1455mm |
| Vehicle Weight | 114kg |
| Seat Hight | 940mm |
| Minimum Ground Clearance | 320mm |
| Fuel Tank Volume | 6.5L |
| Handle Bar | 7075 Al-alloy Reducer Handle Bar |
| Battery Model | 12V/6A Nanometer Colloid Battery |
| Transmission Ratio | 520/13T-51T Manganese Steel Sprocket, Japanese KY-520H Chain |
| Frame | Double Beam Cradle Frame With Imported Hascrome (same material as KTM), Al-Alloy Sub-frame |
| Front Shock Absorber | Taiwan HTW Inverted Double Carvity and Double Adjustable Shock Absorber, Stroke:300mm，Length: 945mm, Inner Diameter: Ø48mm |
| Rear Shock Absorber | Taiwan HTW Double Adjustable Shock Absorber with Forging Cylinder. Stroke: 120mm, Length:485mm |
| Rear Fork | Forging structure Al-Alloy Rear Fork, CNC Chain Adjuster |
| Steering System | Casting Aluminum Alloy Streering Stem, Taper Bearing by Special Steel, CNC 360° Clutch Lever |
| Front Wheel/Rear Wheel | Fr Tyre 80/100-21, Rr Tyre 110/100-18 or 110/100-19. 7 Series Al-alloy Rim, Manganese Steel Spoke, Chroming Copper Adjusting Nuts, CNC Hub,CNC Al-alloy Bush, Hollow Special Steel Fr/Rr Axle |
| Cooling System | Al-Alloy Water Tank and Wind Deflector, Panasonic Fan |
| Brake System | Front Disc Brake, Dual-piston Calipers. Rear Disc Brake, Single-piston Caliper. Forging Al-Alloy Brake Arm |
